Speaker and Headphone Test

Check that your speakers or headphones play the right sound on the right side, are wired in phase, and reach deep bass and high treble. All sounds are made in your browser.

  • Runs in your browser. Nothing is uploaded
  • Free, no sign-up
  • Works offline once opened
Turn your volume down before you start, especially with headphones, then raise it slowly. Test tones can be louder than music, and high frequencies can damage small speakers at full volume.
Nothing playing

Left and right

Left plays a rising chime, Right a slightly higher one. If they come from the wrong side, your headphones are on backwards or the speaker cables are swapped.

Phase (polarity)

Sit between your speakers. “In phase” should sound full and come from the centre. “Out of phase” should sound thin, with less bass, and seem to come from everywhere. If it’s the other way round, one speaker’s + and − wires are swapped.

Frequency sweep, 20 Hz to 20 kHz

The tone rises from a deep hum to a very high whistle. Press the button the moment it fades away. Laptop and phone speakers often can’t play below 100–200 Hz, so the start may be silent.

Bass and subwoofer, 30–80 Hz

A subwoofer should give a steady, clean hum. Rattles or buzzing mean something loose in the room or the cabinet. Phone and laptop speakers can’t play these notes.

Test tone

Surround 5.1

Your device reports 2 output channels, so the surround test is hidden. Connect a 5.1 system over HDMI or a USB sound card, set it to 5.1 in your system’s sound settings, then reload this page.

Your files stay here

  • Speaker Test runs inside this browser tab.
  • Nothing is sent to a server, so there is nothing to delete later.
  • Close the tab and it is gone from DeskTray.

Often used next

Looking for something else?

DeskTray has hundreds of free tools that work the same way.

How to test your speakers and headphones

  1. Turn your volume down first, then press Left, Right or Both.
  2. Try the phase test, bass tones and the frequency sweep.
  3. Press “I can hear it up to…” when the sweep fades, or play any test tone you need.

Features

  • Left, right and both channel chimes
  • In-phase and out-of-phase test
  • Sweep from 20 Hz to 20 kHz with live readout
  • “I can hear it up to…” hearing check
  • Bass and subwoofer tones from 30 to 80 Hz
  • Test tones with any frequency and waveform
  • 5.1 surround test when available

Frequently asked questions

How do I know if my earbuds are on the right way?

Press Left: the chime should come only from the earbud in your left ear. If it comes from the right, swap them. If both sides play it, your device may be set to mono audio in its accessibility settings.

What does the phase test show?

When both speakers are wired the same way, the in-phase sound is full and centred. If one speaker’s + and − wires are swapped, the in-phase sound becomes thin and vague. Swap the wires on one speaker to fix it.

Why can’t I hear the lowest or highest tones?

Phone and laptop speakers usually can’t play below 100–200 Hz. Adult hearing also loses high frequencies with age; many adults hear up to about 14–16 kHz. Try good headphones to tell the speaker apart from your ears.

Why is the 5.1 surround test missing?

It only appears when your browser reports more than two output channels. Connect a 5.1 system by HDMI or a USB sound card, set it to 5.1 in your system’s sound settings, and reload the page.

More Device tools

All 13 Device & Network