Mic Test (Microphone Test)

Check that your microphone works and sounds right before a call, class or recording. Watch the level meter move, then record a short clip and listen back.

  • Runs in your browser. Nothing is uploaded
  • Free, no sign-up
  • Works offline once opened
– dBFS peak
RMS –

Press Start microphone test and allow the microphone when asked.

Voice processing

These are what video-call apps use. Turn them off to hear your microphone as it really is. The table below shows what your browser actually applied.

Record and play back

Start the microphone test first.

0 dBFS is the loudest the microphone can capture; speech usually peaks around −20 to −10 dBFS. If your voice hits 0 and turns red, it may sound distorted. The sound stays on your device.

Your files stay here

  • Mic Test runs inside this browser tab.
  • Nothing is sent to a server, so there is nothing to delete later.
  • Close the tab and it is gone from DeskTray.

Often used next

Looking for something else?

DeskTray has hundreds of free tools that work the same way.

How to test your microphone

  1. Press Start microphone test and allow the microphone when asked.
  2. Speak normally and watch the level meter and waveform move. Pick another microphone if needed.
  3. Record 5 or 10 seconds and play it back to hear how you sound.

Features

  • Live level meter with peak and RMS in dBFS
  • Scrolling waveform or frequency spectrum
  • Microphone picker for headsets and USB mics
  • Echo cancellation, noise suppression and auto gain switches
  • Shows sample rate, channels and applied settings
  • Record 5 or 10 seconds and play back
  • “No sound detected” help

Frequently asked questions

The meter doesn’t move. What should I check?

Make sure the right microphone is picked, that a mute switch on the headset or a laptop mic key isn’t on, and that the input volume in your system sound settings isn’t at zero. On Windows, also check Privacy settings → Microphone.

What is dBFS?

Decibels relative to full scale. 0 dBFS is the loudest the microphone input can capture; everything else is negative. Normal speech peaks around −20 to −10 dBFS. Hitting 0 means the sound is clipping and may be distorted.

Should I turn echo cancellation and noise suppression on?

For calls, yes: they remove speaker echo and fan noise. For music or recording your voice naturally, turn them off. The tool shows what your browser actually applied, as some ignore the setting.

Is my recording uploaded?

No. The sound is processed and recorded in your browser only. The recording is lost when you close the page unless you save it.

More Device tools

All 13 Device & Network