Electricity Bill Calculator
Estimate your home electricity bill from meter readings, units or a list of appliances. Choose a state tariff or enter your own slab rates, and see which appliances use the most power.
- Runs in your browser. Nothing is uploaded
- Free, no sign-up
- Works offline once opened
Approximate: uses typical 2025 domestic tariffs. Your board may add fuel or power purchase adjustments, meter rent and subsidies. Edit the rates below to match your bill.
Bill breakdown
| Item | Units | Rate | Amount |
|---|---|---|---|
| Slab 0–200 | 200 | ₹3 | ₹600.00 |
| Slab 201–400 | 80 | ₹4.5 | ₹360.00 |
| Fixed charges | ₹40.00 | ||
| Electricity duty | 5% | ₹50.00 | |
| Total | 280 | ₹1,050.00 |
Tariff rates for Delhi
Fixed charge assumes a 2 kW load. Households using up to 200 units who opted for the subsidy get a zero bill. PPAC surcharge not included.
Ways to cut the bill
- Set the AC to 24–26 °C. Each degree lower adds roughly 6% to its power use.
- Run the geyser for 15–20 minutes before a bath instead of keeping it on, or fit a timer.
- Replace old fans with BLDC fans (about 30 W instead of 75 W) and any CFL or tube light with LED.
- Buy 5-star rated appliances (BEE label). A 5-star fridge or AC can use a third less power than a 3-star one.
- Switch TVs, set-top boxes and chargers off at the plug: standby power adds up over a month.
- Watch the slab edge: in telescopic tariffs a few units over a limit can push every unit into a higher rate.
Your files stay here
- Electricity Bill Calculator runs inside this browser tab.
- Nothing is sent to a server, so there is nothing to delete later.
- Close the tab and it is gone from DeskTray.
Often used next
Looking for something else?
DeskTray has hundreds of free tools that work the same way.
How to calculate your electricity bill
- Choose your state tariff or enter your own rates.
- Enter meter readings, units, or your appliances with wattage and hours of use.
- Read the estimated bill, the slab breakdown and each appliance’s share.
Features
- Meter readings, units or appliance list
- Approximate tariffs for six states
- Telescopic slabs, fixed charges and duty
- Editable slab rates
- Appliance-wise usage and cost share
- Tips to cut the bill
From watts to units
One unit of electricity is one kilowatt-hour (kWh): a 1,000-watt appliance running for one hour. To estimate an appliance’s usage, multiply its wattage by the hours it runs each day and divide by 1,000. A 1.5-ton inverter AC drawing about 1,200 watts for 8 hours uses roughly 9.6 units a day, close to 290 units a month, while a 10-watt LED bulb used 6 hours a day uses under 2 units a month.
The calculator adds up your appliances, or takes units straight from your meter readings, and applies the slab tariff for your state.
Why the bill rises faster than your usage
- Domestic tariffs are telescopic: the first units are charged at a low rate and each further slab costs more. Crossing into a higher slab makes the extra units expensive.
- Bills also include a fixed or demand charge based on your sanctioned load, electricity duty, and sometimes a fuel adjustment surcharge.
- Some states give free or subsidised units below a usage limit, so keeping under that limit can cut the bill sharply.
- Biggest savings come from ACs (set them to 24–26 °C and clean the filters), geysers (use a timer) and old refrigerators.
Frequently asked questions
How do I calculate units from watts?
Units (kWh) = watts × hours used per day × days ÷ 1000. A 1,500 W AC running 6 hours a day for 30 days uses 1500 × 6 × 30 ÷ 1000 = 270 units.
How are slab tariffs charged?
Most boards charge telescopically: the first slab of units at the lowest rate, the next slab at a higher rate, and so on. In Delhi, 300 units cost 200 × ₹3 + 100 × ₹4.50 = ₹1,050 in energy charges, before fixed charges and tax.
Why is my real bill different?
Bills also include fuel or power purchase adjustment charges, meter rent and subsidies, which change during the year. The rates here are approximate 2025 domestic tariffs; edit them to match your bill.
Which appliances use the most electricity?
Air conditioners, water heaters and old refrigerators usually top the list. Add your appliances to see the share of each in your bill.
Does a 5-star AC really save money?
Yes. A 5-star inverter AC uses considerably less electricity than an older or 3-star model for the same cooling, and the savings grow the more hours you run it.
Do appliances use power on standby?
A little. Set-top boxes, TVs and chargers left on standby can add a few units a month. Switching them off at the plug saves that.
More Calculator tools
All 30 Everyday Calculators- Scientific Calculator Trigonometry, logs and powers.
- Ratio Calculator Simplify and scale ratios.
- Statistics & Average Calculator Mean, median, mode and more.
- CGPA to Percentage Convert CGPA to percentage.
- Grade Calculator Grades and averages from your marks.
- Matrix Calculator Add, multiply and invert matrices.